Drills > Panel & Rivet

Panel Drills – Single Ended – Blue Bullet

Name: Panel Drills - Single Ended - Blue Bullet - Sutton Europe
SKU: D124

D124

Click to zoom

Drills > Panel & Rivet

Panel Drills – Single Ended – Blue Bullet

D124

Sutton Tools Silver Bullet Panel Drills are developed to drill holes for rivets in flat and curved panels used in sheet metal fabrication. The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials.



Save as PDF

Range

Features

Application

Specification

Resources

Range

 

Item #

Diameter d1 (mm)

Diameter d1 (inch)

Diameter d1 (ga)

Length l1 (mm)

Length l2 (mm)

Rivet Size

Image Info

D1240318

3.18

1/8

19.1

3.0mm

D1240326

3.26

19.1

1/8

D1240409

4.09

22.2

4.0mm & 5/32

D1240485

4.85

22.2

3/16

Features

 

135° self centering point minimises wandering when starting and ideal for thin materials
Flute length designed for shallow hole drilling no deeper than 1.25mm x diameter
Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat & wear resistance
Blue surface finish for ferrous applications. The steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels

Application

 

ISO	VDI	Description	Condition	Hardness	Strength
P	1	Steel - Non-alloy, cast & free cutting (~ 0.15 %C)	Annealed	125MPa	440MPa
P	2	Steel - Non-alloy, cast & free cutting (~ 0.45 %C)	Annealed	190MPa	640MPa
P	3	Steel - Non-alloy, cast & free cutting (~ 0.45 %C)	Quenched & Tempered	250MPa	840MPa
P	4	Steel - Non-alloy, cast & free cutting (~ 0.75 %C)	Annealed	270MPa	910MPa
P	5	Steel - Non-alloy, cast & free cutting (~ 0.75 %C)	Quenched & Tempered	300HB	1010MPa
P	6	Steel - Low alloy & cast < 5% of alloying elements	Annealed	180MPa	610MPa
P	7	Steel - Low alloy & cast < 5% of alloying elements	Quenched & Tempered	275MPa	930MPa
P	8	Steel - Low alloy & cast < 5% of alloying elements	Quenched & Tempered	300HB	1010MPa
P	9	Steel - Low alloy & cast < 5% of alloying elements	Quenched & Tempered	350HB	1180MPa
P	10	Steel - High alloy, cast & tool	Annealed	200MPa	680MPa
P	11	Steel - High alloy, cast & tool	Hardened & Tempered	325HB	1100MPa
P	12	Steel - Corrosion resistant & cast - Ferritic / Martensitic	Annealed	200HB	680MPa
P	13	Steel - Corrosion resistant & cast - Martensitic	Quenched & Tempered	240HB	810MPa
M	14.1	Stainless Steel - Austenitic	Age Hardened	180MPa	610MPa
M	14.2	Stainless Steel - Duplex		250MPa	840MPa
M	14.3	Stainless Steel - Precipitation Hardening		250HB	840MPa
K	15	Cast Iron, Grey (GG) - Ferritic / Pearlitic		180MPa	610MPa
K	16	Cast Iron, Grey (GG) - Pearlitic		260HB	880MPa
K	17	Cast Iron, Nodular (GGG) - Ferritic		160MPa	570MPa
K	18	Cast Iron, Nodular (GGG) - Pearlitic		250HB	840MPa
K	19	Cast Iron, Malleable - Ferritic		130HB	460MPa
K	20	Cast Iron, Malleable - Pearlitic		230HB	780MPa
N	21	Aluminum & Magnesium, wrought alloy - Non Heat Treatable		60HB	210MPa
N	22	Aluminum & Magnesium, wrought alloy - Heat Treatable	Age Hardened	100HB	360MPa
N	23	Aluminum & Magnesium, cast alloy ≤12% Si - Non Heat Treatabl		75HB	270MPa
N	24	Aluminum & Magnesium, cast alloy ≤12% Si - Heat Treatable	Age Hardened	90HB	320MPa
N	25	Aluminum & Magnesium, cast alloy >12% Si - Non Heat Treatabl		130HB	460MPa
N	26	Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1		110HB	390MPa
N	27	Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn)		90HB	320MPa
N	28	Copper & Copper alloys (Brass/Bronze) - Bronze (CuSn)		100HB	360MPa
N	29	Non-metallic - Thermosetting & fiber-reinforced plastics
N	30	Non-metallic - Hard rubber, wood etc.
S	31	High temperature alloys - Fe based	Annealed	200HB	680MPa
S	32	High temperature alloys - Fe based	Age Hardened	280HB	950MPa
S	33	High temperature alloys - Ni / Co based	Annealed	250HB	840MPa
S	34	High temperature alloys - Ni / Co based	Age Hardened	350HB	1180MPa
S	35	High temperature alloys - Ni / Co based	Cast	320HB	1080MPa
S	36	Titanium & Titanium alloys - CP Titanium			400MPa
S	37.1	Titanium & Titanium alloys - Alpha alloys			860MPa
S	37.2	Titanium & Titanium alloys - Alpha / Beta alloys	Annealed		960MPa
S	37.3	Titanium & Titanium alloys - Alpha / Beta alloys	Age Hardened		1170MPa
S	37.4	Titanium & Titanium alloys - Beta alloys	Annealed		830MPa
S	37.5	Titanium & Titanium alloys - Beta alloys	Age Hardened		1400MPa
H	38.1	Hardened steel	Hardened & Tempered	45HRC
H	38.2	Hardened steel	Hardened & Tempered	55HRC
H	39.1	Hardened steel	Hardened & Tempered	58HRC
H	39.2	Hardened steel	Hardened & Tempered	62HRC
H	40	Cast Iron - Chilled	Cast	400MPa	1350MPa
H	41	Cast Iron	Hardened & Tempered	55HRC

Wood

Metal

Specialty

Masonry

Soft Wood
Hard Wood
Wood & Nails
Chipboard
Plywood
MDF
Green Wood
Sandwich Construction
Pallet
Window Frame

Steel
Hard Steel
Stainless Steel
Aluminium
Copper / Brass
Cast Iron
Sheet Metal
Precious Metals
Metal Pipe

PVC Plastic
Acrylic
mineral rock wool foams (EPS, PUR), Polystyre
Leather
Rubber
Fibreglass
Carbon Fibre
Glass
Laminate

Masonry
Plasterboard
Compressed Fibre Cement
Cement Sheet
Ceramic Tile
Hebel
Brick
Concrete
Reinforced Concrete
Stone
Granite
Marble

KEY

Optimal Effective PSteel MStainless KCast Iron NNon-Ferous Metals STitanium & Super Alloys HHard Materials

Specification

 

Designation

Material

HSS

Finish

Blu

Shank Form

Point Tolerance

Point Angle

135°

Point Form

Standard

Cutting Edges

Drills > Drills

Drills > Panel & Rivet

Panel Drills – Single Ended – Blue Bullet

Drills > Panel & Rivet

Panel Drills – Single Ended – Blue Bullet

Range

Product Information

Product Information

Product Information

Product Information

Features

Application

KEY

Specification

Resources