2 Flute Ballnose > Endmills > Industrial
2 Flute Ballnose Slot Drills – R30 UNI – Long Reach – Harmony
E440Slot Drill, Ballnose, 2 Flute, R30 UNI, Long Reach, Harmony for high performance
For profile & contour milling in long reach applications
Suitable for materials up to 1600 N/mm2
AlCrN for longer tool life
Item #
Diameter d1 (mm)
Diameter d1 (inch)
Length l1 (mm)
Length l2 (mm)
Length l3 (mm)
Diameter d2 (mm)
Rad
Info
E4400200
2.00
-
62
3
7
6
1
- Pack Qty: 1
- Barcode: 9311963561257
- Order Multiple: 1
E4400200
E4400300
3.00
-
62
4
9.5
6
1.5
- Pack Qty: 1
- Barcode: 9311963561264
- Order Multiple: 1
E4400300
E4400400
4.00
-
62
5
12
6
2
- Pack Qty: 1
- Barcode: 9311963561271
- Order Multiple: 1
E4400400
E4400500
5.00
-
80
6
14.5
6
2.5
- Pack Qty: 1
- Barcode: 9311963561288
- Order Multiple: 1
E4400500
E4400600
6.00
-
80
7
17
6
3
- Pack Qty: 1
- Barcode: 9311963561295
- Order Multiple: 1
E4400600
E4400800
8.00
-
90
9
22
8
4
- Pack Qty: 1
- Barcode: 9311963561301
- Order Multiple: 1
E4400800
E4401000
10.00
-
100
11
27
10
5
- Pack Qty: 1
- Barcode: 9311963561318
- Order Multiple: 1
E4401000
E4401200
12.00
-
120
13
32
12
6
- Pack Qty: 1
- Barcode: 9311963561325
- Order Multiple: 1
E4401200
E4401400
14.00
-
120
15
37
14
7
- Pack Qty: 1
- Barcode: 9311963561332
- Order Multiple: 1
E4401400
E4401600
16.00
-
140
17
42
16
8
- Pack Qty: 1
- Barcode: 9311963561349
- Order Multiple: 1
E4401600
E4401800
18.00
-
140
19
47
18
9
- Pack Qty: 1
- Barcode: 9311963561356
- Order Multiple: 1
E4401800
E4402000
20.00
-
160
21
52
20
10
- Pack Qty: 1
- Barcode: 9311963561363
- Order Multiple: 1
E4402000
- Slot Drill, Ballnose, 2 Flute, R30 UNI, Long Reach, Harmony for high performance
- For profile & contour milling in long reach applications
- Suitable for materials up to 1600 N/mm2
- AlCrN for longer tool life
| ISO | VDI | Description | Condition | Hardness | Strength | Optimal |
|---|---|---|---|---|---|---|
| P | 1 | Steel - Non-alloy, cast & free cutting (~ 0.15 %C) | Annealed | 125HB | 440MPa | |
| P | 2 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Annealed | 190HB | 640MPa | |
| P | 3 | Steel - Non-alloy, cast & free cutting (~ 0.45 %C) | Quenched & Tempered | 250MPa | 840MPa | |
| P | 4 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Annealed | 270MPa | 910MPa | |
| P | 5 | Steel - Non-alloy, cast & free cutting (~ 0.75 %C) | Quenched & Tempered | 300MPa | 1010MPa | |
| P | 6 | Steel - Low alloy & cast < 5% of alloying elements | Annealed | 180HB | 610MPa | |
| P | 7 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 275MPa | 930MPa | |
| P | 8 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 300MPa | 1010MPa | |
| P | 9 | Steel - Low alloy & cast < 5% of alloying elements | Quenched & Tempered | 350MPa | 1180MPa | |
| P | 10 | Steel - High alloy, cast & tool | Annealed | 200MPa | 680MPa | |
| P | 11 | Steel - High alloy, cast & tool | Hardened & Tempered | 325MPa | 1100MPa | |
| P | 12 | Steel - Corrosion resistant & cast - Ferritic / Martensitic | Annealed | 200HB | 680MPa | |
| P | 13 | Steel - Corrosion resistant & cast - Martensitic | Quenched & Tempered | 240HB | 810MPa | |
| M | 14.1 | Stainless Steel - Austenitic | Age Hardened | 180HB | 610MPa | |
| M | 14.2 | Stainless Steel - Duplex | 250HB | 840MPa | ||
| M | 14.3 | Stainless Steel - Precipitation Hardening | 250HB | 840MPa | ||
| K | 15 | Cast Iron, Grey (GG) - Ferritic / Pearlitic | 180MPa | 610MPa | ||
| K | 16 | Cast Iron, Grey (GG) - Pearlitic | 260MPa | 880MPa | ||
| K | 17 | Cast Iron, Nodular (GGG) - Ferritic | 160MPa | 570MPa | ||
| K | 18 | Cast Iron, Nodular (GGG) - Pearlitic | 250MPa | 840MPa | ||
| K | 19 | Cast Iron, Malleable - Ferritic | 130MPa | 460MPa | ||
| K | 20 | Cast Iron, Malleable - Pearlitic | 230MPa | 780MPa | ||
| N | 21 | Aluminum & Magnesium, wrought alloy - Non Heat Treatable | 60HB | 210MPa | ||
| N | 22 | Aluminum & Magnesium, wrought alloy - Heat Treatable | Age Hardened | 100HB | 360MPa | |
| N | 23 | Aluminum & Magnesium, cast alloy ≤12% Si - Non Heat Treatabl | 75HB | 270MPa | ||
| N | 24 | Aluminum & Magnesium, cast alloy ≤12% Si - Heat Treatable | Age Hardened | 90HB | 320MPa | |
| N | 25 | Aluminum & Magnesium, cast alloy >12% Si - Non Heat Treatabl | 130HB | 460MPa | ||
| N | 26 | Copper & Copper alloys (Brass/Bronze) - Free cutting, Pb > 1 | 110HB | 390MPa | ||
| N | 27 | Copper & Copper alloys (Brass/Bronze) - Brass (CuZn, CuSnZn) | 90HB | 320MPa | ||
| N | 28 | Copper & Copper alloys (Brass/Bronze) - Bronze (CuSn) | 100HB | 360MPa | ||
| N | 29 | Non-metallic - Thermosetting & fiber-reinforced plastics | ||||
| N | 30 | Non-metallic - Hard rubber, wood etc. | ||||
| S | 31 | High temperature alloys - Fe based | Annealed | 200MPa | 680MPa | |
| S | 32 | High temperature alloys - Fe based | Age Hardened | 280MPa | 950MPa | |
| S | 33 | High temperature alloys - Ni / Co based | Annealed | 250MPa | 840MPa | |
| S | 34 | High temperature alloys - Ni / Co based | Age Hardened | 350MPa | 1180MPa | |
| S | 35 | High temperature alloys - Ni / Co based | Cast | 320MPa | 1080MPa | |
| S | 36 | Titanium & Titanium alloys - CP Titanium | 400MPa | |||
| S | 37.1 | Titanium & Titanium alloys - Alpha alloys | 860MPa | |||
| S | 37.2 | Titanium & Titanium alloys - Alpha / Beta alloys | Annealed | 960MPa | ||
| S | 37.3 | Titanium & Titanium alloys - Alpha / Beta alloys | Age Hardened | 1170MPa | ||
| S | 37.4 | Titanium & Titanium alloys - Beta alloys | Annealed | 830MPa | ||
| S | 37.5 | Titanium & Titanium alloys - Beta alloys | Age Hardened | 1400MPa | ||
| H | 38.1 | Hardened steel | Hardened & Tempered | 45 | ||
| H | 38.2 | Hardened steel | Hardened & Tempered | 55 | ||
| H | 39.1 | Hardened steel | Hardened & Tempered | 58 | ||
| H | 39.2 | Hardened steel | Hardened & Tempered | 62HRC | ||
| H | 40 | Cast Iron - Chilled | Cast | 400HB | 1350MPa | |
| H | 41 | Cast Iron | Hardened & Tempered | 55 |
KEY
Optimal
Effective
PSteel
MStainless
KCast Iron
NNon-Ferous Metals
STitanium & Super Alloys
HHard Materials
Designation
UNI
Material
VHM-ULTRA
Finish
AlCrN
Shank Form
HA
Helix Angle
R30
Point Tolerance
e8
Shank Tolerance
h5
Point Form
Ballnose
Standard
Sutton
Rake Angle
6
