E535 Harmony UNI Endmill

Performance Unequalled… with chatter-free milling

The Harmony range of endmills represents worlds latest technologies to provide increases in both performance and tool life. The key to successful milling is to minimize or eliminate the vibration produced in the cutting action. This is known as a build-up of harmonics in the work piece, which can be detrimental to the tool life of the endmill. Often this vibration has been rectified by slowing down the cutting speed and feeds, altering the size of the cut & increasing the rigidity of the set-up. The Harmony Endmill overcomes vibration, through a combination of tool design, micro geometry, material & coating, without the need to sacrifice productivity.

Slotting
Material: AISI 1020
Size: 12.0
Cutting speed: 150m/min
Speed: 1273.2 RPM
Feed rate: 0.055 mm/tooth
Feed rate: 875 mm/min
Depth of cut radial: 12mm
Depth of actual radial: 12mm

Sidecutting
Material: AISI 1020
Size: 12.0
Cutting speed: 200m/min
Speed: 5305 RPM
Feed rate: 0.055 mm/tooth
Feed rate: 1167 mm/min
Depth of cut radial: 10mm
Depth of actual radial: 12mm

Finishing
Material: AISI 1020
Size: 12.0
Cutting speed: 300m/min
Speed: 7958 RPM
Feed rate: 0.075 mm/tooth
Feed rate: 2387 mm/min
Depth of cut radial: 2mm
Depth of actual radial: 12mm